RTD-15 full height rotor turnstiles for indoor and outdoor applications
Application
The RTD-15 series of rotor turnstiles offers a combination of full closure of passageway, contemporary design and high throughput capacity.
Delivery set
- turnstile with built-in electronics
- guide barrier set
- remote control panel
Design
- for indoor and outdoor application
- 120° rotor configuration
- two LED directional indicators
- flush mounted walkway downlights
Models
- RTD-15.1 motorized
- RTD-15.2 electromechanical
This series of full height rotor turnstiles is intended for use both indoors and outdoors. The housing is suitable for operation at ambient temperatures from -40°С to +55°С.
The rigid welded aluminium construction of this turnstile offers advanced reliability and vandal resistance, and guarantees many years of the turnstile trouble-free operation even in unfavourable environments.
The fine structure powder coating finish with micaceous iron-effect provides effective electric insulation, improved impact resistance and superior corrosion protection.
 |
 |
| Two LED directional indicators | Cable remote control panel |
The turnstile is provided with bright built-in LED indicators to show if access is granted or denied. It is also possible to connect optional remote light indicators.
The RTD-15 can be operated from the remote control panel included in a standard delivery set or a wireless remote control (optionally) and can be easily integrated into most access control systems. The operating modes are set up independently for each passage direction.
The turnstile features:
- two flush mounted 24V/50W halogen lamps located on the top channel as standard
- anti-backup facility to prevent reverse rotation once the rotor has turned more than 60°
- “Fire Alarm” control input to unlock the turnstile from fire alarm system or emergency button
- “Lock-chamber” access mode for additional visual verification
 |
 |
| Key override controls for emergency situations |
Two flush mounted walkway downlights |
Two built-in mechanical release locks, one for each passage direction, allow to unlock the turnstile with a key for free passage if there is a need to override an access control system or in case of power failure.
When operating under an access control system (ACS), the turnstile can support pulse and potential control modes. The turnstile outputs have galvanic isolation. The logic is protected against short circuit, overload and polarity inversion.
Thanks to its low power consumption, the turnstile is supplied with safe voltage – 24V max.
Options
Available in the same material and colour as the RTD-15 turnstiles, full height MB-15 railings and WHD-15 security gates will help to form a passageway of any required configuration and make the entrance design complete.
For protection against the elements and climbing over, the turnstile can be supplied with a protective canopy to be joined into a single portal structure with the turnstile.
A number of canopied RTD-15 turnstiles can be installed in one row. Special elements have been designed to provide reliable joining of two or more canopies. This design also allows for cabling through all the top channels of the lined turnstiles, which makes the installation considerably easier.
Thanks to an extra foundation frame RF01, the turnstile can even be installed on an unstable ground.
Technical specifications:
Operating voltage:
|
24±2 V DC 24±2 V DC |
Power consumption:
|
105W 30W 105W |
Throughput rate:
|
20 persons/min. 30 persons/min. |
Number of operating modes:
|
6 3 |
| Overall dimensions (H × W × D) | 2325x1800х1600 mm |
| Passageway width | 755 mm |
| Ingress Protection Rating | IP53 under EN 60525 |
Operating temperatures:
|
- 40°C to +55°C +1°C to +40°C |
Technical Data:
 |
 |
 |
 |
 |
 |
Materials and Finishes:
R - Sandpaper powder coating with pearl mica effect; light beige colour
Sandpaper powder coating with pearl mica effect; light beige colour
Corrosion protected powder coated aluminium frame